ASK AN EDUCATOR! – “How can I convert an analog value to a digital one?”

Nicolas asks:

I’d really like to know how to “”convert”” an analog value to a digital one.
In a word : I have an Arduino, a photoresistor, with a pull-down resistor.
I want to know if the light is above or below a given threshold.

I know how to read the value with analogRead(photoResPin), and compare it to my threshold (in code), but I’d like to do that without software (only using digitalRead), handling that threshold in hardware.

Can you help me ?
I guess I can use a transistor, but don’t know how to “”precisely”” set the threshold (by changing the pull-down resistor value ?).

What a great question and the answer should be pretty easy to implement! As long as the current you need to control is relatively low, a simple comparator like the LM393 should do the trick. You can configure the comparator to act as a Schmitt Trigger, you can set a high and low threshold voltage using positive feedback as shown in the diagram below. This basically relies on two voltage dividers (R1/R2 & R2/R3) to set the high an low values, then uses R4 as a logic pull-up. By using this positive feedback you help to eliminate multiple transistons between a HIGH/LOW output when your input voltage approachs and hits you threshold, as illustrated in the second diagram. This feedback also helps to speed up the time in which the comparator changes state.

This Schmitt Trigger Calculator should help you determine the values for your resistors and R4 is commonly a 1k.

Here is another comparator calculator that might help as well.

I hope this has helped to answer your question, and the topic of switching from microcontrollers to stand alone hardware is certainly on my lists of things to research further! So thanks to you!

Don’t forget, everyone is invited to ask a question!

Click here!

“Ask an Educator” questions are answered by Adam Kemp, a high school teacher who has been teaching courses in Energy Systems, Systems Engineering, Robotics and Prototyping since 2005.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



3 Comments

  1. If you want to get fancy, the arduino/AVR has AIN0 and AIN1 going to an internal comparator, so if you set the registers right, you can just use a potentiometer for one and a resistor with the photoresistor for the other. It can even cause an interrupt.

  2. George Graves

    Great post!

  3. The right answer here would have been to use the internal comparator of the arduino, although reading it is a bit different.

    Also, should’t draw schematics with the ground up.

Sorry, the comment form is closed at this time.