Black Lives Matter - Action and Equality. ... Adafruit is open and shipping.

DIY Air quality monitoring

3597088400 866E918C09 B

Outstanding project using our GPS shield, MintyBoost and Arduino! DIY Air quality monitoring Brent writes…

Air Quality Monitoring – Recently I had a discussion with someone from the South Riverdale Community Health Centre on Air Quality monitoring in Ontario (AQI). I learned a number of things, there are only 40 Air Quality Monitors in Ontario and they test for six key indexes. Toronto runs a slightly different test, the Air Quality Health Index (AQHI) which is a pilot programme and reports on how the Air Quality will affect your health. The AQHI test for three key indicators. Detecting three indexes sounds pretty reasonable.

Mobile Air Quality MonitorBy building my own Air Quality project I hope to be able to reproduce the AQHI results at a fraction of the price and provide instruction to enable anyone across the province a chance to build their own.

To the left is a photo of the final (but always in a state of flux) result. It is a GPS enabled device powered by two AA’s which senses Air Quality and Ozone. I am currently running tests in a variety of ways. This is a more complex setup than it has to be. Below I’ll detail both a simple setup and a complex setup.

Simple Air Quality Monitor:

  • USB-Serial Connection (~$15)
  • Air Quality Sensor & Ozone Sensor ($6 each)
  • 2 Resistors ($.15 – I’m using a 15k Ohm)

Connect the sensors as illustrated on the website. Attach to a computer and upload the data to a provider such as Pachube to share with the world. (Need an invite? Message me.)

Mobile Air Quality Monitor:

  • Arduino (~$45)
  • GPS Sheild ($16)
  • GPS ($60)
  • SD-Card ($20-60 depending on size – the SD-Card library uses a FAT-16 environment, so 1GB is all you’re going to need)
  • MintyBoost ($20 – 12 Hour lifespan for 2 AAs, 3 for a 9V battery)
  • Air Quality & Ozone Sensor ($6 each, see above for links)
  • Batteries (~$5 – I’d suggest rechargables)
  • 2 Resistors ($.15)

We are angry, frustrated, and in pain because of the violence and murder of Black people by the police because of racism. We are in the fight AGAINST RACISM. George Floyd was murdered, his life stolen. The Adafruit teams have specific actions we’ve done, are doing, and will do together as a company and culture. We are asking the Adafruit community to get involved and share what you are doing. The Adafruit teams will not settle for a hash tag, a Tweet, or an icon change. We will work on real change, and that requires real action and real work together. That is what we will do each day, each month, each year – we will hold ourselves accountable and publish our collective efforts, partnerships, activism, donations, openly and publicly. Our blog and social media platforms will be utilized in actionable ways. Join us and the anti-racist efforts working to end police brutality, reform the criminal justice system, and dismantle the many other forms of systemic racism at work in this country, read more @

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 20,000+ makers on Adafruit’s Discord channels and be part of the community!

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more

CircuitPython – The easiest way to program microcontrollers –

Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Everything in its place

Electronics — The Case Of The Disappearing Capacitance

Python for Microcontrollers — Python on Microcontrollers Newsletter: New Hardware, Python Releases and Much More! #Python #Adafruit #CircuitPython @circuitpython @micropython @ThePSF

Adafruit IoT Monthly — BLE Store Capacity Indicator, Aquarium Automation, and more!

Microsoft MakeCode — Virus Destroyer!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NewProducts 8/6/2020 Feat. #Adafruit #ST25DV16K I2C #RFID #EEPROM #Breakout – STEMMA QT / Qwiic!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at !


  1. Congrats on the great work Brent! I recommend everyone heads over to his blog and grab the RSS feed. He’s got some great projects running ( Great use of Adafruit products!

  2. And the link to the details was lost in the post, here it is –

  3. Really great project! About how much life do you get from the batteries?

  4. Chuck Buckley

    Hmm.. Shouldn’t this be in a tricorder case?

Sorry, the comment form is closed at this time.