First test of our generative light project.
In this case using Moka’s physics engine.
Custom 20 x 112 pixel LED matrix
P10 LED modules
Real time control by Linsn LED control card (linsn.com/indexen.htm)
The Linsn card takes a DVI feed from the computer and maps the first 20×112 pixels on screen to the LED matrix
There will be a user interface and the possibility controlled by buttons on the device plus the ability to control it through an iPhone.
Now that we have the LED matrix we are sourcing the rest of the parts needed and designing the enclosure to contain it all.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — The Prepared Podcast – Jonathan Cedar, BioLite
Wearables — Start with a sketch
Electronics — My signal isn’t THAT noisy, is it?
Biohacking — Fine Tuning Fluorescent Dyes
Sorry, the comment form is closed at this time.