PCB manufacturing process

Pp Pcb Pool Tag2-185 Gross
Nice overview!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 9/13/2024 Featuring Adafruit Feather RP2350 with HSTX Port! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython Comes to the ESP32-P4, Emulating Arm on RISC-V, and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — IoT Vulnerability Disclosure, Decorative Dorm Lights, and more!

Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process

Electronics – Adafruit Daily — Autoscale is cheating!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !

4 Comments

  1. Eddie
    October 15, 2009 at 10:25 am

    Who do you use to manufacture your PCBs?

  2. adafruit
    October 15, 2009 at 10:36 am

    we use advanced circuits

  3. Kevin Townsend
    October 15, 2009 at 11:28 am

    If you’re in Europe, these guys have decent prices as well(4 layers is only 2x the price of 2 layers, for example, if you’re working with BGA), and they go down to 6 mil. At the moment they’ll also throw in a free laser cut stencil with the prototype order. It’s more $$$ than going the Chinese route, but the free stencils and < 2 weeks to your dorr means I use them for higher priority prototypes, or boards that I’m pretty sure are in their final iteration (for the free stainless steel stencil).

  4. .
    October 15, 2009 at 2:23 pm

    Too bad we can’t just print the conductors and N and P regions directly with small inkjet heads. 😀

Sorry, the comment form is closed at this time.

Filed under: random — by adafruit

Comments (4)