Adafruit in Fry’s electronics – Fremont, Sunnyvale, San Diego and San Jose – CA

4122692330 38Ac6E90C2 B
Pt 2336

Adafruit in Fry’s electronics in Fremont, Sunnyvale, San Diego and San Jose. If you’re in those areas stop in and look for the Maker Shed kiosk, there you will find the MintyBoost! Here’s what the MAKE gang had to say

We’re ecstatic about the fact that we now have Maker Shed kiosks, with magazines, books, and electronics kits, in several California Fry’s stores. We think this is big news, not only for Maker Media, but for all indie makers — a major retail chain is now giving small kit- makers this level of exposure. And, we think it’s particularly cool that we designed and built these kiosks in-house, and even personally delivered them to the stores! What other publisher could claim that? Here, Assoc.

Publisher and General Manager of Maker retail, Dan Woods explains more:

Maker Shed kiosks are now installed in four of Fry’s largest superstores. Each kiosk merchandises current and back issues of MAKE, Make: Project books, and kits, with an emphasis on maker-made kits produced by indie makers like Limor Fried’s MintyBoost, Mitch Altman’s Brain Machine, Ken Murphy’s Blinky Bugs, Dale Wheat’s Tiny Cylon and Wee Blinky kits, and Amy Parness and Ariel Churi’s DIY Design Electronics kits. This indie maker angle was a really important selling point to Fry’s. The kiosk’s themselves are all-MAKE in their design and construction. The challenge was to create a merchandising/branding kiosk that could show off maker-made kits, as well as our books and magazines, all in a 2′ X 2′ footprint. The design we came up with incorporates the Maker Faire workbench framing as the internal structure, refurbished fence boards from West Sonoma, and some nicely weathered corrugated shed aluminum that was locally salvaged. The result is a nice combination of weathered shed and repurposed industrial tubing. They’re uniquely MAKE, and Fry’s is ecstatic. In fact, they were even trucked down and setup by Heather (Harmon-Cochran) and Rob (Bullington) in one day. These are the stores that currently have kiosks. (San Diego will be set up by Fry’s staff next week)

Locations!
San Diego, CA
9825 Stonecrest Boulevard
(858) 514-4500

San Jose, CA
550 E. Brokaw Road
(408) 487-1000

Fremont, CA
43800 Osgood Road
(510) 252-5300

Sunnyvale, CA
1077 East Arques Avenue
(408) 617-1300

Congrats to everyone at MAKE, this is a wonderful accomplishment getting DIY and electronics in more places!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



5 Comments

  1. More locations! I was in the Burbank Fry’s today. They need something like this!

  2. Would be nice to see this stuff in a store on the east coast. Unfortunately RadioShack is the only Fry’s like store we have and the chances of them doing something similar is nil.

  3. Oh dear, is that Glenn Beck’s book right next to it on the book shelf in the first picture?

  4. They need an East Bay location, and have for years. They need a northern store.

  5. Fry’s blows RadioShack out of the water on all counts…….and what’s up with nothing at the Fountian Valley, CA. location? – they filmed a Microsoft commercial there…..

Sorry, the comment form is closed at this time.