The Engadget Show – Kindle etching and DIY adventures with Adafruit Industries


The Engadget Show: Kindle etching and DIY adventures with Adafruit Industries. Josh writes –

If you’ll recall, some months ago we held a little competition for readers to submit artwork destined for laser-etching on the backsides of Amazon’s Kindle. After everyone voted on the top five out of the mountain of selections, we took the gaggle of readers down to our friends at Adafruit Industries (headed up by the lovely and delightful Limor Fried and Phil Torrone) for some time under the laser. While we were there getting our etch on with their massive laser, we convinced Limor and Phil to show off some of the other crazy kit they’ve got in the labs — and we’ve captured it all on film… er, video. Take a look at our excursion into the world of dynamic DIY’ing — we think you’ll like what you see.

We posted some additional photos of the etched Kindles here – and you can also view the Engadget show M4V here


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



5 Comments

  1. Still something I don’t get about pick and place machines. Do they solder the components too? If not, how to the components stay on. When you picked the board out those capacitors seemed pretty anchored.

  2. “To the laser!”

    @Mark: I’d guess there would be some solder paste on the board that the parts would stick to.

  3. Hey, what kind of laser is that?

  4. Phil & Limor, for the record? We are ALL truly envious of your Pick and Place, and especially for your hyper cool laser etcher-cutter. I think all of us would love to be the Wizards of the Wall Street, but would never want to compete with you. Thank you so much for sharing these frack’n ultra cool projects that we can build in our homes. My soldering has improved 10,000%. So Warlock and Wizard, you have my best wishes for continued success, and the envy of all my dreams.

  5. They use a 32 watt Epilog laser. They talked about it on their weekly chat last week. Ask an Engineer chat is Saturday nights, 7 pm, PST, @ http://www.adafruit.com, then click “chat”.

Sorry, the comment form is closed at this time.