The Brushduino

Img 6423
The Brushduino Steve writes –

The Story – My daughters don’t brush their teeth long enough, if left to their own devices. When my wife or I brush their teeth, we do a nice thorough job that takes a little while but when the girls do it themselves, they tend to cut it short. Timing them doesn’t help, as they just stand there and chit-chat until the timer goes off. It’s not that they don’t brush their teeth LONG enough, it’s that they don’t brush their teeth WELL enough. It occurred to me that if could make something that monitored how WELL they brush their teeth—and maybe even guided them through the process a little—then they’d eventually establish better habits for the future. I started thinking about what I could build that would help them and settled on the notion that an accelerometer was the perfect sort of thing to keep tabs on what constitutes a brush “stroke” while they’re in there brushing their teeth. All I’d need to do is come up with a little hardware and software to make it happen. About the Hardware – For my birthday last year, I got myself an Arduino starter kit from www.adafruit.com and hadn’t used it for anything yet. I was curious about the Arduino platform and have read a lot about it. I figured it was time to build something on it and this toothbrush thing seemed like the perfect fit.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. At first I thought this was a Drawdio + toothbrush. Might serve the same purpose.

Sorry, the comment form is closed at this time.