Test drive of a modified adafruit Drawdio with a Blacet/Metalbox/Wiard/Cynthia Frac format modular synthesizer system. Drawdio equipped with a 1/8″ mini phone jack output and connected to an insulated 5.6 mm clutch lead holder (mechanical pencil) and a graphite starting patch on a Circa sketch book paper sheet. Drawdio output patched to Blacet 2225 I/O, to Klang Werk to Time Machine to Wiard Borg Filter, with I/O gate to Blacet EG1 ADSR. Drawdio patch mixed with Dronespace voices via Blacet 2200 VCA Quad Mix (see Dronespace videos info). Thanks to Ladyada Limor Fried and her crew at adafruit industries, and (as always) to John Blacet, Michael Ford, Grant Richter, and Cynthia Webster for their fine modular designs. Produced by Doktor Bob at Rapid Eye Audiolabs. Copyright 2010 Robert B. Trelease, all rights reserved.
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.