0

Turn a broken EPSON printer in to a LASER CUTTER using an ADAFRUIT motorshield for ARDUINO


Miguel turned a broken EPSON printer in to a LASER CUTTER using an ADAFRUIT motorshield for ARDUINO! He writes –

When my EPSON 830U decided not to work for me anymore (printing heads clogged) I thought I could make some use of the still working mechanics of the printer. It’s based on a couple of stepper motors for both axis of motion (print head and paper feed).

So I replaced the original power supply and drive electronics for an arduino board and an stepper motor driver from Adafruit industries. Now I could move the printhead
anywhere on a page. Next step was to add a laser on the printhead and to control it using a PWM output from arduino (so laser power could be modulated from the computer).

Though it only cut thin back color cardboard, it has may uses. I wrote a C program for arduino to control the stepper motors and laser. It receives data from the computer and
interfaces with the old printer guts.

Data format is very simple: each line contains a sequence of integer numbers separated by blank space. Each pair of numbers represents one XY coordinate. Line ends with a CR (0x0d) character (that also shuts down the laser to stop cutting). First coordinate of a line sets the starting point (before reaching that location the laser is off).

I wrote some software running on my iMac that reads a Inkscape SVG file (only straight lines are supported though, use Flatten Bezier on curves to get a sequence of straight line segments) and translates it to the desired data format for arduino and it shows a preview on the screen. Data is sent through a USB port to the arduino. iMac code was written using Processing language (Java-based) so it can run on Windows or Linux too.

If you have an old EPSON printer, you may want to give it a second thought before putting it to the trash.


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 13,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell with Google Hangouts On-Air is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Charitable business and the Buy-One Give-One angle

Wearables — Stitch marks

Electronics — Potentiometer conventions

Biohacking — Vitamin-C + Gelatin for Accelerated Recovery

Python for Microcontrollers — The Top Programming Languages 2019 – Python tops the charts with a CircuitPython nod! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Adafruit IoT Monthly — Adafruit IO Updates, RGB Stream Deck Message Panel, and more

Microsoft MakeCode — Welcome to the MakeCode Newsletter!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



2 Comments

  1. crazylarrypage

    looks like this would be perfect for making solder paste templates

  2. that looks great i’ll try to aply the concept for what the other comment sugested

Sorry, the comment form is closed at this time.