This is a makerbottable altoid tin-like enclosure for MintyBoost XL found at thingiverse.com/thing:2144 Will presumably also work for other similar devices. It’s not necessary in the strict sense, but if you can’t find an altoid tin you have a ready replacement. Additionally, you can alter the files to print a design or logo on the lid (in relief and thin lines only, since the top of the lid is on the bottom of the print), and you won’t have to worry about insulating the board from the metal case.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired
No comments yet.
Sorry, the comment form is closed at this time.