0

The Humane PC – Low cost AVR / Arduino based computer!

Board

Pc Setup
The Humane PC via MAKE.

The Humane Personal Computer combines the ease of Arduino development with the excitement of a classic stand-alone television-and-keyboard PC.

The novel design of the Humane PC offloads the complex NTSC/PAL video signal generation to a second dedicated AVR microcontroller. This makes writing video applications on the main microcontroller a breeze – as easy as writing text and VT52 control codes to the serial port, thanks to firmware from the TellyMate project.

A third AVR microcontroller is dedicated to implementation of a USB device, thanks to the AVR V-USB Project. The default firmware pemits programming the device over a serial port, using the Arduino bootloader, without the need for any hardware programmer. However the USB microcontroller can be used to implement any USB device profile, or used as a co-processor for general use.

The Humane PC comes with number of integrated peripherals to play with, including a Micro-SD Card reader, a PWM audio out device, four buttons, an IR receiver and transmitter, and a PS/2 keyboard connector.

Features

  • 3 Atmega328p Microcontrollers – one for video, one for USB, and one for general computing.
  • NTSC/PAL composite video output for display on any TV
  • B&W 38×25 character text or simple graphics display
  • VT52 + H19 video terminal emulation
  • Accepts PS/2 Keyboard
  • Micro-SD Card Reader
  • PWM Audio output
  • Completely Open Source design
  • Infrared LED and reciever
  • Micro-USB powered
  • Fully programmable USB controller (atmega328p) allows use as a variety of USB slave devices
  • Main MCU is serial programmable via USB
  • Expansion headers compatible with most Arduino expansion shields
  • 4 input buttons
  • Optional aluminum case with powder coat finish
  • Programable using C/C++ libraries, or via Arudino IDE
  • Uses Tellymate Project code for vt52 video output
  • Uses AVR V-USB firmware to implement a USB device


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 14,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Re-evaluating Amazon after its acquisition of Whole Foods

Wearables — It’s not a deal breaker

Electronics — Higher isn’t always better

Biohacking — Vitamin-C + Gelatin for Accelerated Recovery

Python for Microcontrollers — Supercharged Supercon with CircuitPython, Quoth the Raven MOAR PYTHON! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Adafruit IoT Monthly — The S in IoT is for Security, Amazon announces Sidewalk and more!

Microsoft MakeCode — Xenomorph candy bucket and spooky workshops with MakeCode!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. How about using the dual serial ports of a Sanguino for I/O rather than two separate Arduino’s?

Sorry, the comment form is closed at this time.