0

DIY Drones has a pick-and-place (Updated)…

Pt 10370

 Pick-And-Place 7722-Fv Images 7722 Webaw

Update: This is their second pick and place machine! Chris and gang from DIY Drones have a pick and place machine (same as ours Manncorp MDC7722-FV) – so we’ve added them to the pick-and-place twitter list. There are now 3-4 companies doing open source hardware and using the same machine!

If you’re interested in this pick and place machine, check out our wiki & our forums!


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Fewer startups, and other collateral damage from the 2018 tariffs

Wearables — Light as a Worbla feather

Electronics — How to make your own magnetic field probe!

Biohacking — The State of DNA Analysis in Three Mindmaps

Python for Microcontrollers — One year of CircuitPython weeklies!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. This is turning into a cult. We need to develop some sort of MDC7722-FV secret handshake or something. Limor can be the high priestess, Phil can handle the propoganda (err … PR), Akiba over at FreakLabs can be in charge of indoctrinating the new recruits (“Tired of other geeks laughing at your tweezers … get a pick and place and no one will even doubt your otaku-cred again!”). Maybe we can develop a $100 ‘buy your own pick and place machine’ pyramid scheme? That plus membership fees should bring in a steady supply on new 8mm reels for everyone.

    When does the pick and place badge come out, by the way? 🙂

Sorry, the comment form is closed at this time.