Company based in the Washington, D.C. area is looking to hire a professional or high-level hobbyist electronics engineer/microcontroller programmer to create a simple LCD interface for an entertainment lighting product. The concept of this project is to replace a set of dip switches used for DMX addressing with a 20×4 LCD interface (and 4 control momentary switches) and microcontroller. This microcontroller would also ideally have an hour counter, temperature sensor and a few other features to be discussed.
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.