We are developing a blue tooth car kit. We are looking to connect a Bluecore5 ROM chip to an ARM M0, a keyboard and graphic display. We need communication between the Bluecore5 ROM chip to an ARM M0 using the serial port on both chips with the BCSP protocol. We want to make calls through and have access to the phone book on 2 paired cells. We wish to use a nxp micro
The display is a 128 * 64 display with serial bus to a NT75451 controller.
This will need to be programmed and fonts created.
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.