This belt we made debuted during “Ask an Engineer” – it uses 1 meter of our Digital RGB LED waterproof flexi-strip, an Atmega32u4 Breakout Board+, Lithium Ion Polymer Battery and a USB LiIon/LiPoly charger.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
Maker Business — Making sure the CHIPS act isn’t just crumbs
Wearables — And now a word on laser ettiquette
Electronics — Capacitor ESR
Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.1.0 and 8.2.0-beta0 out and so much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!
Microsoft MakeCode — MakeCode Thank You!
EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 5/31/23 Feat. Adafruit NeoDriver – I2C to NeoPixel Driver Board – Stemma QT!
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !
5 Comments
Sorry, the comment form is closed at this time.
how were you able to address each of the leds individually? I thought you could only turn on the lights in this strip en masse.
dave, check the link to the rgb led strip
Can you measure the battery voltage & total current draw for this LED belt (I assume it is a full meter strip)? This real world example would be useful (in addition to the [email protected] per segment spec listed on the product page). Thanks!
My bad. I see you have digital flexistrip rgb LEDs now.Very cool. Going to have to make another purchase!
Any chance we can see a tutorial on this? I want to make a couple of these belts for my daughters and it would be nice to see specifics on the BOM and assembly instructions.
Thanks!