Arduino Uno SMD (Atmega328 – assembled) – Uno SMD w/Atmega328
NEW PRODUCT – Arduino Uno SMD – Atmega328 – assembled. The new Uno is the latest version after the Duemilanove, with an improved USB interface chip. Like the Duemilanove, it not only has an expanded shield header with a 3.3V reference and a RESET pin (which solves the problem of how to get to the RESET pin in a shield) AND a 500mA fuse to protect your computer’s USB port, but ALSO an automatic circuit to select USB or DC power without a jumper! The Uno is pin and code-compatible with the Duemilanove, Diecimilla and older Arduinos so all your shields, libraries, code will still work.
This is the SMD edition, created during the Worldwide Atmel Shortage of 2011; Atmel could not make enough of the Arduino chip in through-hole format to fulfill demand. This UNO has an SMD version of the chip instead. It acts completely identically – all code and shields work perfectly – except you cannot remove the AVR microcontroller.
New! Each Arduino ordered from Adafruit now comes with 4 rubber bumpers that will help protect the board when you want to place it on a table. (Also keeps the Arduino from sliding around.)
Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It’s intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: Open Hardware is In, New CircuitPython and Pi 5 16GB, and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
will the normal edition still be avalible? the SMD defeats the entire purpose for me as i blow out the chip(ATMEGA 168&328) on a regular basis like once a week but this is not as DIY friendly.
Does it have the programming header pre-installed for the USB chip?
will the normal edition still be avalible? the SMD defeats the entire purpose for me as i blow out the chip(ATMEGA 168&328) on a regular basis like once a week but this is not as DIY friendly.
Current Mouser stock:
Over 40,000 TQFP, zero DIP.