The first of 24 satellites that will make up the global positioning system is put into orbit.
GPS revolutionized navigation, both at sea and on land, by providing position reports with unprecedented, pinpoint accuracy. Each satellite is placed in a specific orbit at a specific altitude to ensure that four or five satellites are always within range from any point on the planet. A GPS receiver picks up signals from the satellites and trilaterates the data to fix the position.
This satellite system is so valuable — besides navigation, GPS has applications in mapmaking, land-surveying and the accurate telling of time — that even though it was developed and is maintained by the U.S. Department of Defense, it’s been available since 1993 without charge to anyone, anywhere on Earth.
Although GPS has eliminated the need for determining a ship’s position by shooting the sun or stars, no sailor worthy of the name would put to sea, even now, without the ability to use a sextant. Electronic navigation devices fail, and even GPS isn’t immune to the odd glitch, and the open ocean is a lonely place to be if you don’t know where you are.
GPS shield for Arduino kit with data-logging capability. After building this easy kit, you can create your own geo-locative project.
The shield is designed specifically for use with the EM-406a module: the small surface-mount GPS connector is pre-soldered for you. (It is a high-quality engine with quick time-to-fix and excellent reception, even in downtown New York City!) It can also be used with a Tyco A1035D, EB-85A or Lassen IQ module (see the webpage for more details).
GPS module, Arduino, and SD memory card are not included. Please check the parts list to see what is included. Please note that the library is rather bulky, requiring 12K of flash and more than 1/2 K of RAM for buffering SD card memory blocks. The examples work fine on ATmega168-based Arduino (or compatible) but for more complex projects I strongly recommend upgrading to an ATmega328!
Run-time is approximately 3 hours with a 9V battery and up to 12 hours using a MintyBoost, assuming no power-saving features are enabled.
We are angry, frustrated, and in pain because of the violence and murder of Black people by the police because of racism. We are in the fight AGAINST RACISM. George Floyd was murdered, his life stolen. The Adafruit teams have specific actions we’ve done, are doing, and will do together as a company and culture. We are asking the Adafruit community to get involved and share what you are doing. The Adafruit teams will not settle for a hash tag, a Tweet, or an icon change. We will work on real change, and that requires real action and real work together. That is what we will do each day, each month, each year – we will hold ourselves accountable and publish our collective efforts, partnerships, activism, donations, openly and publicly. Our blog and social media platforms will be utilized in actionable ways. Join us and the anti-racist efforts working to end police brutality, reform the criminal justice system, and dismantle the many other forms of systemic racism at work in this country, read more @ adafruit.com/blacklivesmatter
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.