Adafruit will not be shipping USPS orders Monday February 18, 2019 for the federal holiday, Presidents Day.
Expedited USPS orders placed after 11am ET Friday February 15 will go out Tuesday February 19.
Please note that this item does not come with an Arduino (you’ll need one to use with the shield), or an SD card. It does come with the RTC battery, however. The kit is un-assembled, You’ll need some basic soldering skills to put it together, but even if you don’t have much experience you can get it done in under 1 hour.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card
Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
Included libraries and example code for both SD and RTC mean you can get going quickly
Prototyping area for soldering connectors, circuitry or sensors.
Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Python for Microcontrollers — Python is for the birds, deep dive, Raspberry Pi store, and more! #Python #Adafruit #CircuitPython @circuitpython @micropython @ThePSF @Adafruit
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !
I just wanted to say thank you so much for putting those two through-holes for i2c access! I’m using the data logging shield with an Arduino Mega 2560 and was struggling trying to find a way to programmatically get the RTC working until I saw those holes. I was thrilled!
It’s obvious you all put so much thought and work into what you do, and we appreciate it! Thank you!