PART FINDER FRIDAY – Copper tape with conductive adhesive

Fetch-6

Copper tape with conductive adhesive – We use copper tape for soldering to EL wire, and for the drawdio (to wrap around the pencil. This 3M brand stuff is high quality and sticks nicely to surfaces. It would probably also be great for making capacitive switch electrodes.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



5 Comments

  1. I used this to make the "tracks" for the <a href="http://www.puzzlemation.com/">Puzzlemation</a&gt; tiles to rest on. Worked great. One tip: If you want to connect to it electrically, you really need to solder to it to get a reliable connection. Just sticking the tape on doesn’t work so well.

  2. Copper foil tape is a common Stained Glass supply with some great electronics uses. I installed under-cabinet lighting in my kitchen, and the light kit I used had a small touch sensitive puck you could place in the corner underneath a cabinet. I took some tape, ran it across the touch sensor and all along the lip of the cabinets. Now you can control the lights just by bumping into the tape anywhere along the cabinets, rather than try to tap the tiny hidden puck.

  3. I use this to make temporary quick connections between my multimeter probes and my breadboard jumper wires. Quick and dirty, and works like a champ.

  4. I used a touch sensor with dimmer and wired it into my bedroom light switch. I ran the sensor into some tape and ran it across the entire room, so you could turn the lights on from the door or off from the bed (or anywhere else for that matter)

    My next plan is to use conductive paint to do the same, and have an underlying layer of this tape for the paint to conduct with.

  5. Remember using this for non lead channel stained glass back in the day. I should go back to the stained glass shop and pick some up. I can see a lot of uses for it now that you bring it up.

Sorry, the comment form is closed at this time.