Levi van Veluw Origin of the Beginning

Levi van Veluw Origin of the Beginning…

Ron Mandos Amsterdam is excited to announce the latest solo exhibition of Levi van Veluw.We warmly welcome you to join us at the opening reception of this eagerly anticipated show on Saturday the 21st of May from 5 to 7 pm, at which the artist
will be present.

Levi van Veluw will showcase new work from a series of new installations, photographs and videos in which he draws from his own childhood memories to thematically and narratively develop his own brand of self-portraiture.

The artist has created 3 “rooms” covered with more then 30.000 wooden blocks, balls and slats respectively. Each “room” is executed as a life-size installation (4m x 2.5m x 2.5m) and will be presented at the gallery together with photographs and videos.

Portrayed in one piece is a desk, a table lamp, a bookcase. The edge of the table is burned by Levi van Veluw as he had an obsession for fire. All of these objects including every inch of the floor, walls and ceiling is covered in the same material: 14.000 16 cm2 dark brown wooden blocks. The blocks are made by the artist and glued on the wall one by one. The works suggest a narrative world behind the abstract portraits.
On the one hand these works present themselves as a continuation of van Veluw’s formal approach to self-portraiture, with their preoccupation for materiality, pattern and texture. Yet they are simultaneously very personal pieces. The repetitive structures seemingly express a ‘horror vacui’ and recall van Veluw the youth and his obsessive attempts to gain control on his life by gaining control of his surroundings. Dimly light and dark in colour the overriding tone of these pieces are claustrophobic and sombre, exuding a sense of loneliness. The meticulous craftsmanship and high quality material with which every last knock and cranny is covered, result in a series of works that are also highly aesthetic.

These installations are inspired by different aspects of van Veluw’s boyhood bedroom, where he spent many solitary hours between the ages of 8 and 14: the Origin of the Beginning.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.