0

41 Perfectly Sphere Water Droplets Aligned to a Grid

41 Perfectly Sphere Water Droplets Aligned to a Grid

achine that adds drops of water onto a special textured surface. Each drop forms into an almost perfect sphere through the surface tension of the water and the omniphopic Material. The electronically controlled pipette wanders through a square grid of 21 x 21 drops to form a micro-matrix and returns to the beginning. After approximately 300 minutes, and when thewater drops have evaporated, the same process starts again.


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Rethink Robotics closes shop. Long live collaborative robots #makerbusiness

Wearables — Zip it up

Electronics — Serial overkill

Biohacking — Biohacking Resources – Books, Talks and Podcasts

Python for Microcontrollers — CircuitPython creates new assistive tech opportunities

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. Very cool piece, but 21 x 21 is not egal 41 🙂

Sorry, the comment form is closed at this time.