USB / DC / Solar Lithium Ion/Polymer charger – v1.0. Make your projects to go green this summer with our specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. We’ve spent over a year testing and tinkering with this charger to come up with a plug and play solution to charging batteries with the sun and we’re really pleased with what we ended up with.
Easy to use! Pick up any of our many 3.7V/4.2V LiIon batteries, and a 6V solar panel. Plug the battery into the BATT port using a 2-pin JST cable and the solar panel into the DC jack using a 2.1mm terminal block adapter. Put the solar panel outside (and keep the battery out of the sun, it needs to be kept shaded!) to start charging. You can power another project like a Mintyboost at the same time by connecting to the LOAD output port
Battery and MintyBoost not included.
Our carefully designed charger is designed specifically for solar charging, and will automatically draw the most current possible from the panel in any light condition!
Comes with an assembled and tested charger board, a large capacitor (you will need to solder it in however you would like it to sit), a JST 2-pin cable for connecting up a battery or load, and for a limited time a bonus 2.1mm adapter cable that will convert the small 1.4mm jack to a 2.1mm jack.
3.7V/4.2V Lithium Ion or Lithium Polymer battery charger
Automatic charging current tracking for high efficiency use of any wattage solar panel
Use any 5-6V solar panel (6V seems to work best)
Three color indicator LEDs – Power good, Charging and Done
Low Battery Indicator (fixed at 3.1V) with LED output
Set for 500mA max charge rate, can be adjusted from 50mA up to 1A by soldering in a resistor
Will always draw the most current possible from a solar cell – up to the max charge rate!
Smart load sharing automatically uses the input power when available, to keep battery from constantly charging/discharging
Temperature monitoring of battery by soldering in a 10K NTC thermistor (not included) – suggested for outdoor projects where the battery may get hot (50°C) or cold (0°C).
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
