Last night on the show+tell, I talked about the little steam engine I built last fall. It’s a horizontal single-cylinder, 1cc displacement, with a scotch yoke drive mechanism. It’s a combination of manually-machined and CNC-machined parts from aluminum and brass stock. Everything but the mounting bolts, the shaft bearing, and the scotch yoke dowel pin were made by me. It runs at about 3500RPM at 30 psi. Below is a short video I made of it running:
You can also check out this little stop-motion vid I did of the drive mechanism:
Finally, if you want to learn more about how scotch yokes work, and see how they differ from the typical crank arm and connecting rod linkage, you should check out this excellent demo at Wolfram Research, which illustrates the accelleration and velocity curves of each.
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Python for Microcontrollers — Python snakes its way on the SparkFun SAMD21 Mini, Hackaday.io, 10k thanks, and Tim’s magazine #Python #Adafruit #CircuitPython @circuitpython @micropython @ThePSF @Adafruit
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !