0

MEGA MINTYBOOST

6090166717 D0A384Ff0D Z
We had this ready to go if needed, wasn’t needed.


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Fewer startups, and other collateral damage from the 2018 tariffs

Wearables — Light as a Worbla feather

Electronics — How to make your own magnetic field probe!

Biohacking — The State of DNA Analysis in Three Mindmaps

Python for Microcontrollers — One year of CircuitPython weeklies!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



6 Comments

  1. Outstanding! No go-bag is complete without one.
    Will the mega kit be available before the next disaster? 🙂

  2. Now all we need is a lipo charger built in. Maybe we can do a mega-minty board that has a 5V socket.

  3. Tell me if i’m wrong, but a couple of AA cells will provide around 3500mAh i think.

    Geekiness left apart, i’d prefer to take a "standard" minty boost with easily found 2xAA as replacement rather than this one with an expensive LiPo (which needs to be charged!)

  4. Have a solar/USB chargeable version of this ready to go. Waiting on a spiffy acrylic enclosure from ponoko. That lipo does take awhile to fully charge, but it sure can keep a USB chargeable gadget going for a long time! Will update forum thread with pics when assembled.

  5. I built a version of this that uses the usb/dc li-poly charger and is housed is a pepper can.

    It works awesome in that the spoon cover can fit both the usb A of the minty boost and dc/usb ports of the charger, covering them when not in use.

    I call it “Spicy Boost” with the tagline-“Put some pep back in your device!”

  6. Hi,

    here is my version of the ‘mega minty boost’.
    http://americanbikeadventure.co.uk/megamintyboost/megamintyboost.jpg
    it uses 2 sparkfun 5w solar panels (http://www.sparkfun.com/products/9241), a sparkfun 6Ah lipo battery (http://www.sparkfun.com/products/8484), a generic 12v to 5v car adapter feeding an Adafruit solar lipo charger which then goes into an Adafruit mintyboost – all contained in a small Otterbox.
    i use it on my bike when i am off touring. I carry a 9v wall psu to keep it charged up as well. it is used to charge up my homemade bike computer (this has its own lipo – http://www.sparkfun.com/products/8483 and charger), HTC desire, gopro and a couple of other mobiles.
    i will be adding a fuel guage sometime soon (http://www.sparkfun.com/products/10617) so my bike comp will be able to monitor charging.
    I will be putting up a project page for my bike computer and stuff, most of which is Adafruit / Sparkfun based, soon if you would be interested…
    many thanks for your excellent site and tutorials.
    Tim from UK

Sorry, the comment form is closed at this time.