Drawings for the iNecklace


Inecklace Back

Inecklace Bezel

Inecklace Loop


Some of you asked for these for the iNecklace, here they are! You can also check out all the files on github

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org

Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !


  1. Hey, Limor, could you speak a little bit on your process for actually creating the metal casings? I know all the files are on github and I even remember you showing a video for one of the cufflinks being milled, but could you speak a little bit more on the process of getting the CAD files together, sending them to be milled, etc. etc.?

    I also would certainly like to hear a little bit about the prices involved (prototype, set up, etc.) but I understand if you don’t want to mention that at all.

    Looks awesome by the way! Can’t wait till your next wearable comes out!

  2. @dorkusmonkey – we work with mike, our co-designer, so we’re lucky enough to have him do that part of the process. our costs had everything included, but we do know it’s often thousands of dollars to do set up and prototyping.

    we’re going to visit mike in canada and hopefully video and talk on our show about this too.

  3. Hi kids, How about a pin back version for a tie pin or just to stick on your hipster groovy geek clothes?
    Beta Test? ;^}

  4. @kentb, that’s a really easy mod you could totally do that 🙂

  5. It occurs to me that it would be possible to sell cheap “inserts” for the necklaces and cufflinks as bare boards, or in different colors, algorithms and so on. Then you could take your necklace or cufflinks and substitute in different personalities, at the cost of just the electronics (cheap) rather than all that custom machined metal (expensive.) Any plans along those lines?

    Or they might appeal to the amateur machinists who think the metal is easy unless it’s solid tungsten, but don’t want to mess with chips…

  6. @westfw – of course 🙂

Sorry, the comment form is closed at this time.