I am getting ready to sell some kits and wanted a good way to photograph the assembly without fumbling around trying to hold a camera in one hand and a project in the other. The answer? An intervalometer. A device that can send an IR signal to my Nikon, triggering the shutter. The video above explains all of the features including; automatic delay calculation, auto stop, multiple LCD and LED feedback options, Li-Po charging, FTDI headers, and manual control via button or plug-in foot switch.
This project will work with most Nikon DSLR cameras without changing anything, but can easily be adapted to work with Canon, Sony, or any camera that will accept an IR remote.
You can get nice RGB LCD’s, as well as the foot switch at Adafruit Industries. They even have positive character, negative character (the one used in this project), positive graphic, and negative graphic versions!
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — “Packaging” chips in the US
Wearables — Enclosures help fight body humidity in costumes
Electronics — Transformers: More than meets the eye!
Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!
Microsoft MakeCode — MakeCode Thank You!
EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!
No comments yet.
Sorry, the comment form is closed at this time.