Counterfeit Parts Found on P-8 Posiedons

Faketopcoat

Morefake

Counterfeit Parts Found on P-8 Posiedons @ Defense Tech.

Senate Armed Services Committee Chairman Carl Levin (D-Mich) just dropped a couple of very alarming tales during a hearing about counterfeit parts making their way into brand new U.S. military weapons.

Earlier this year, Boeing and the Navy found that the ice detection system on a brand new P-8 Poseidon was defective. The ice detection system is a critical piece of hardware designed to prevent tragedies by alerting pilots to the presence of ice on an aircraft’s control surfaces. Where did this defective part come from? China. A whole batch of a key piece of the ice detection hardware that was sent to the P-8 production line turned out to be used and worn out parts that were badly refurbished and sold to P-8 subcontractor BAE Systems as a new part, according to Levin. Boeing and BAE first became aware of the problem in 2009, he added.

The fake P-8 parts are just one of many examples of how counterfeit parts — often made from 1980s and 1990s-vintage junk computer parts that are sanded down and remarked in China and then sold back to the U.S. as brand new computer chips for advanced weapons systems. One witness at the hearing just described growing counterfiet semiconductors seeping into critical weapons systems as “ticking time bombs.”

Thanks Travis!

Previous:
Counterfeit parts are a big headache


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



6 Comments

  1. the price of giving up on manufacturing in the US.

  2. Bob,

    the issue isn’t one of manufacturing in the USA or not. The likelyhood of BAE systems manufacturing outside the USA or Mainland Europe is pretty remote.

    If manufacturers only purchased from authorized distributors, this counterfeit issue would be far less common. What I’ve seen happen is that when inventory levels are low through the authorized distribution channels, purchasers start looking to Asian IC brokers. That’s where the leak for counterfeit parts is.

  3. @Bob: Nice straw man you have there. You think no American has ever tried to pass off counterfeit goods as genuine? It’s only those other "dirty" countries where someone would try cheat another human being, amirite?

    Anyway, it’s irrelevant because counterfeit parts got into the aircraft not through poor manufacturing, but through poor supply channels. The article says that BAE Systems (a British company) was the contractor that didn’t bother to verify that the parts it was getting from its suppliers were genuine, or even worked properly.

    I could be cynical and speculate that someone at BAE Systems just ordered the parts off of eBay while charging the United States government full price. But I’ll try to restrain myself.

  4. I don’t think people should jump down Bob’s throat. Read the article again where it says: “.. Where did this defective part come from? China. ”

    Obviously the author of the article wants you to jump to the same conclusion Bob did.

    I will say this… China has serious problems. Look at the 2008 Milk scandal http://en.wikipedia.org/wiki/2008_Chinese_milk_scandal for example.

  5. I want to know why testing didn’t catch this before it was ever RFI’d? We’re installing avionics on birds carrying our soldiers and we don’t know with great certainty that the systems they will use in flight are known good?

  6. I had this happen to me while I was a manufacturing engineer at an aerospace company. We were having lots of failures on some assemblies. It turned out to be an op-amp, that wasn’t really an op-amp. Our “government authorized” parts broker had bought some counterfeit parts on the gray market.

    Since it was for a weapons system, the FBI got involved. I got to talk with them for a little bit, told them where we got the parts, and up the supply chain they went. That was about 10 years ago, this type of thing should have been fixed by now.

Sorry, the comment form is closed at this time.