0

NFC payments with PayPal

Ss-480-0-10

NFC payments with PayPal @ Android Market.

“Request Money with an NFC-enabled phone”

Right now it’s NFC for phone to phone, but eventually – phone to cash register / transit gate, etc… And don’t forget “Google Wallet – NFC (Near Field Communications)


Pn532 Lrg-1

PN532 NFC/RFID controller breakout board. New for version 1.3! We now have an onboard power LED, a 3.3V regulator and a breakout so you can connect an FTDI cable directly. This will let you use libnfc out of the box with your desktop computer!

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and ‘act’ like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you’ll want to use!

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn’t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)

The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate – this lets you do NFC dev using any Linux/Mac/Windows computer!
Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1″ header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a Mifare Classic 1K card! (You can get more tags from us here) New in version 1.3: onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.


Pt 101023

Pt 101021

We have a bunch of new RFID/NFC cards, tags and stickers – check’em out!

MiFare Classic (13.56MHz RFID/NFC) Card
This is a blank MiFare Classic card – often used for train/bus passes but also found in other systems where a proximity card is desired…

MiFare Classic (13.56MHz RFID/NFC) Clear Tag
This is a blank MiFare Classic ‘laundry’ tag – often used for laundry or identification but also found in other systems…

MiFare Classic (13.56MHz RFID/NFC) Clear Keychain Fob
This is a blank MiFare Classic keychain fob – often used for electronic locks or customer identification but also found in other systems…

MiFare Classic (13.56MHz RFID/NFC) Sticker
This is a blank MiFare Classic sticker – often used for inventory, identification but also found in other systems…

MiFare Classic (13.56MHz RFID/NFC) White Tag
This is a blank MiFare Classic ‘laundry’ tag – often used for laundry or identification but also found in other systems…


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Despite multiple bankruptcies, RadioShack continues to find ways to keep the lights on

Wearables — Molding with glue

Electronics — A few words on inductor resistance

Biohacking — Running Blades

Python for Microcontrollers — Help bring CircuitPython to other languages!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.