NEW PRODUCT – Adafruit Bone Box – Enclosure for Beagle Bone

Window-83
NEW PRODUCT – Adafruit Bone Box – Enclosure for Beagle Bone. Pack up your Beagle Bone in this lovely clear plastic case. We designed this case to be the ideal enclosure, with plenty of elegant details to make it useful to you!

Window-1-47
The enclosure comes as 6 laser cut acrylic pieces, 4 plastic standoffs, 8 hex-nuts and 8 1/2″ 4-40 screws. Assembly is easy, and requires only a Phillips screwdriver. Once assembled, the box has lovely engraved ends with cut-outs for the DC power, Ethernet, microSD card, USB host and USB debug ports.

Window-2-24
The ends are even bone shaped – they act as a bumper to keep the attachment screws from scratching your desk.

There’s plenty of space inside to add on one of our Beaglebone Proto Capes with components or connectors soldered on. Fits any BeagleBone version out there – but not BeagleBoards!

Window-3-4

  • Made of clear acrylic sheet, 3mm thick
  • Fits a BeagleBone only, not BeagleBoards
  • Outer dimensions (including the ‘bone’ extensions): 70mmx44mmx96mm
  • Inside dimensions: 30mm x 56mm x 87mm
  • Enclosure weight (without Beagle Bone): 85 grams

Window-4-1

In stock, shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Philips, an electronics giant, has faded from its former glory

Wearables — You’re a gem

Electronics — Copper keepout!

Python for Microcontrollers — Python on Microcontrollers Newsletter: 100 CircuitPython Community Libraries, a New Arduino UNO and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Boxing Glove Tracker, Disconnecting Smart Appliances, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 3/31/2023 Featuring Adafruit Feather RP2040 RFM69 Packet Radio – 868 or 915MHz – RadioFruit and STEMMA QT! (Video)

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



5 Comments

  1. And I just not half an hour ago ordered a beaglebone. Now I am gonna have to wait for my next order to get one of these 🙂

  2. Wow … that’s the kind of effort that really puts this place in it’s own league. Great job on this!

  3. Very nice and attractive case. Now if I can only find a tin big enough for it 😉

  4. any plans for a nice enclosure like this for the arduino w/ethernet shield?

  5. Gorgeous! Love it! *pulls out wallet*

Sorry, the comment form is closed at this time.