0

Welding sticker now in stock!

Window-96

Welding sticker now in stock!


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Fewer startups, and other collateral damage from the 2018 tariffs

Wearables — Zip it up

Electronics — Static kills… slowly.

Biohacking — Who Writes the Heart Rate Algorithms?

Python for Microcontrollers — CircuitPython creates new assistive tech opportunities

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



4 Comments

  1. @k scharf – ladyada welds, it would not be a halloween costume.

  2. @KScharf: I weld too, and I know many hackers who do ‘serious welding’.

    Regarding your faceplate, unless you’ve got experience doing casting, you might be in for disappointment. Sand casting is something it takes a lot of time to become good at, and nearly all castings require some machining to finish.

    To match the finish of something like a Niles you’d be better off just having the panel machined and finished by a professional shop. Provided you’re drawing is correct, it would save you considerable time and heartbreak in the long run.

  3. @K Scharf – I also weld, and I’m not just a ‘buggar artist’. It’s a good skill to have. 🙂

  4. Yes! Great SMAW welding sticker; now we need Oxy/acetylene, MIG, TIG, and Plasma!

Sorry, the comment form is closed at this time.