NEW PRODUCT – DC Toy / Hobby Motor – 130 Size

Window-97
NEW PRODUCT – DC Toy / Hobby Motor – 130 Size. These are standard ‘130 size’ DC hobby motors.

Window-1-54
They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V.

Window-2-30
This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting. They’ll fit in most electronics that already have 130-size motors installed and there’s two breadboard-friendly wires soldered on already for fast prototyping

  • Operating Temperature: -10°C ~ +60°C
  • Rated Voltage: 6.0VDC
  • Rated Load: 10 g*cm
  • No-load Current: 70 mA max
  • No-load Speed: 9100 ±1800 rpm
  • Loaded Current: 250 mA max
  • Loaded Speed: 4500 ±1500 rpm
  • Starting Torque: 20 g*cm
  • Starting Voltage: 2.0
  • Stall Current: 500mA max
  • Body Size: 27.5mm x 20mm x 15mm
  • Shaft Size: 8mm x 2mm diameter
  • Weight: 17.5 grams

In stock and shipping now.


Eink, E-paper, Think Ink – Collin shares six segments pondering the unusual low-power display technology that somehow still seems a bit sci-fi – http://adafruit.com/thinkink

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 26,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Sticky energy

Electronics — My signal isn’t THAT noisy, is it?

Python for Microcontrollers — Python on Microcontrollers Newsletter: COVID tracking, OSHWA proposals and much more! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — Our Favorite IoT Projects from 2020

Microsoft MakeCode — Play MakeCode Arcade games on Raspberry Pi!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 1/19/21 MPR121 Cap Touch Gator Breakout @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.