I was given a Yashica Mat-124G camera and you cannot get batteries for the light meter, so I decided to make one. I already had the analog meter and the small box, so the two were a natural fit. I also used Adobe Illustrator to make a new paper template and scale for the meter. This needs some work and I realize this is not actual lux levels. The trick here is to come up with a scale useful to the camera I will be using it with.
Nice use of the Adafruit Perma-Proto boards!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Shenzhen: The Silicon Valley of Hardware (Full Documentary) and Who invests in hardware?
Wearables — Take flight with shiny wings
Electronics — Inadequate volt signal
Biohacking — Movie: The Immortalists – Live Forever… or die trying.
No comments yet.
Sorry, the comment form is closed at this time.