Last night I made LVL1′s hackerspace passport using our Full Spectrum Engineering laser. It really was not that difficult. I used Chris Cprek’s LVL1 logo image for the stamp. It is the Plenary Gear logo at the top left of this page.
I used laserable rubber for this project. Even though it is low-odor you can still smell it. It smells like burning rubber from a car.
To laser the image, I took the original image and made it black and white. I removed the blue background and cleaned it up a bit using Gimp. I then imported it into Inkscape where I mirrored the image. The letters have to be in mirror image or it will not stamp correctly. Next, I ‘printed’ to the laser cutter. The Full Spectrum Engineering interface to driving the laser is pretty darned good. If you are reading this post and do not have a laser, check out Full Spectrum, they are a real good value for your money and highly recommended.
I also cut a wooden back for the rubber out of some 1/8″ baltic birch plywood scrap I had laying around. I used double stick tape to tape the rubber onto the plywood backing. Easy. Finally I hot melt glued a handle onto the stamp. Interestingly, the handle came from the Louisville Slugger Museum and it is a scrap from when a baseball bat is cut out on their lathe.
I used a stamp pad from office depot which worked well and Jon was able to stamp his passport for the first time! I also made another stamp with the Lady Ada graphic from Adafruit. That also came out well.
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell with Google Hangouts On-Air is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — Charitable business and the Buy-One Give-One angle
Wearables — Stitch marks
Electronics — Potentiometer conventions
Biohacking — Vitamin-C + Gelatin for Accelerated Recovery
Python for Microcontrollers — The Top Programming Languages 2019 – Python tops the charts with a CircuitPython nod! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit
Adafruit IoT Monthly — Adafruit IO Updates, RGB Stream Deck Message Panel, and more
Microsoft MakeCode — Welcome to the MakeCode Newsletter!
Sorry, the comment form is closed at this time.