NEW PRODUCT – Waterproof 2xAA battery holder. Keep your power source safe and toasty in these waterproof 2xAA battery holders. They’re just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches together with 4 machine screws. What we like about this design is that the hexnuts are captive in one side and you can assemble/disassemble as many times as you need. There’s a potted power switch and a rubber-boot on-off switch (press to turn on/off). Use with any alkaline or rechargeable batteries for about 3V output.
Would work great with our waterproof DC power plugs (just use heatshrink to waterproof the solder connections)
We also have a 3xAA version when you need a little more power.
- Weight: 36 grams
- 2″ (2.5″ with machine screw ears) x 3″ x.8″ (50mm (63mm with machine screw ears) x 77mm x 20mm)
- 6″ (150mm) long power cable
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Happy CyberMonday ya’ll it’s #MakerBusiness
Wearables — Don’t forget a coat
Electronics — Watch that ground clip!
Biohacking — MD2K – Mobile Sensor Data to Knowledge
No comments yet.
Sorry, the comment form is closed at this time.