The enclosure is from Adafruit – about perfect, although it’s a pretty tight fit. The display is an OLED character display. (It’s a little quirky, and it draws more power than a regular LCD, but it’s really bright and clear.) The EM-406A GPS mounts on the top of the case. I drilled a small hole that shows the LED on the GPS module which lets me know when I have a fix. The IR detector is also on the top, so I can use a TV remote to set the parameters. The bottom has the on/off switch, (and now a piezo switch) and a slot that allows removal of the microSD card.
We are very excited to have one of the first (and we think the best) enclosure & project box for Arduino! Available in white, clear, and translucent smoke colors!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.