notbrainsurgery: OWI Robotic Arm Edge USB protocol (and sampe code).
OWI Robotic Arm Edge – You can use USB interface module to connect it to PC. Unfortunately official software works only under Windows and do not provide API. I have been able to reverse engineer their USB protocol and write sample code which allows to control the arm from Mac and Linux.
This is USB device with vendor id 0x1267 and product id 0. The device is controlled by 3 byte commands sent via USB control transfers. Command format is byte0, byte1, byte2. Each byte controls a group of arm features. All motors could be controlled independently. Most commands start action which is continued until next action is signalled. Byte ’00’ universally used as stop action.
Each Friday is PiDay here at Adafruit, be sure to check out our posts, tutorials and new Raspberry Pi related products. Have you tried the new “Adafruit Raspberry Pi Educational Linux Distro” ? It’s our tweaked distribution for teaching electronics using the Raspberry Pi.
Want a FREE Raspberry Pi? For limited time and while supplies last – Adafruit is including a FREE Raspberry Pi in all orders over $350 (not including shipping). This offer is for online customers only, not distributors/resellers/hackerspaces.
Halloween season is here! Check out all the posts, gift guides, and more!
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 10/9/24 Feat. Adafruit RP2040 Snap-on Enclosure for Adafruit Feather RP2040 USB Host
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: New Python Releases, an ESP32+MicroPython IDE and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
Adafruit IoT Monthly — Garden Lights, Bluetooth 6.0, and more!
Maker Business – Adafruit Daily — First Solar’s $1.1 billion development of vertically integrated factory in the U.S.
Electronics – Adafruit Daily — My signal isn’t THAT noisy, is it?
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at
AdafruitDaily.com !
Sorry, the comment form is closed at this time.
How awesome… I want one of these!