Small 1.2″ 8×8 Ultra Bright LED Matrix – Yellow, green and blue!

Window-1-204

Window-346

Window-2-99

We got our ultra-bright LED Matrices in more colors! Now with Yellow, Green and Blue!

Make a scrolling sign, or a small video display with this 8×8 gridded matrix. Only 1.2″ on a side, it is quite visible but not so large it wont plug into a breadboard! 64 180mcd LEDs are contained inside the plastic body, in an 8×8 matrix. There are 16 pins on the side, 8 on each, with 0.1″ spacing so you can easily plug it into a breadboard with one row on each side for wiring it up.

Since the display is in a grid, you’ll need to 1:8 multiplex control it. We suggest either using a 74HC595 and TPIC6B595 (using the 74HC’ to control the 8 anodes at once and then using the TPIC’ to drive one cathode at a time) or just using a singleMAX7219 which will do the multiplexing work for you.

In stock and shipping now (yellow, green and blue).


Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — Go insane with a membrane (button or keypad)

Electronics — Shift away from basic arithmetic

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.0 RC 1 Out, Board Guides, and Much More! #CircuitPython #Python @ThePSF @micropython @Raspberry_Pi

Adafruit IoT Monthly — Cat Doorbell, Deep Algae Bloom Detector, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 02/01/23 Featuring Adafruit Floppy FeatherWing with 34-Pin IDC Connector!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.