Adafruit Holiday Gift Guide 2012 – GPS

Gobble Gobble day is next week, which means the hotly anticipated (by us!) and dreaded (by you!) holiday shopping season is beginning.  Luckily for you we’re making it easier this year with our 2012 Adafruit Gift Guide series.  Each day until Christmas we’ll roll out a different theme, everything from wearable electronics to Arduino shields, from 3D printers to photography to gift certificates from sites Adafruit likes!

Happy shopping!


Adafruit Ultimate GPS – We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire – that’s why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that. It’s got everything you want and more.


FLORA Wearable Ultimate GPS Module – This module is the best way to add a GPS to your wearable project. It’s part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora motherboard. Installed on the PCB is the latest of our Ultimate GPS modules, a small, super-thin, low power GPS module with built in data-logging capability! This module’s easy to use, but extremely powerful.


Geogram ONE – An open source tracking device that is packed with features.

  • Quad Band GSM
  • 66 Channel GPS based off the MT3339 Chipset
  • Atmega328p with Arduino Bootloader preinstalled
  • 6 axis digital accelerometer
  • On board single cell lipo fuel gauge
  • 6 pin FTDI connector for connecting optional FTDI cable
  • USB conection for charging Lipo battery
  • 4 Analog inputs (3 can be used as digital IO)
  • 2 Digital IO lines

Cooking Hacks 3G + GPS shield for Arduino – The 3G + GPS shield for Arduino enables the connectivity to high speed WCDMA and HSPA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new “Internet of Things” era.  The module counts also with an internal GPS what enables the location of the device outdoors and indoors combining standard NMEA frames with mobile cell ID triangulation using both assisted-mobile (A-GPS) and mobile-based (S-GPS) modes.  There is also a version that works with the Raspberry Pi!


Coobro Geo – an easy to assemble GPS navigation kit. Upload coordinates, turn it on, and the Coobro Geo will help you navigate to any destination on earth by using LEDs to show you the correct direction and distance remaining. Before you leave on your quest, press and hold the breadcrumbs button and the Coobro Geo will remember your location and help you navigate back. Store up to five pre-entered destination coordinates and five breadcrumbs, or modify the open source code and store as many coordinates as you want.  Use the Coobro Geo to help you find geocaches, store and navigate between hot fishing spots, complete a scavenger hunt, or simply help you find your car after a hike.


SHIPPING DEADLINES

Here are your 2012 shipping deadlines for ordering from Adafruit. Please review our shipping section if you have specific questions on how and where we ship worldwide for this holiday season.

UPS ground (USA orders): Place orders by Friday 11am ET – December 14, 2012 – Arrive by 12/24/2012 or sooner.

UPS 3-day (USA orders): Place orders by Wednesday 11am ET – December 19, 2012 – Arrive on 12/24/2012.

UPS 2-day (USA orders): Place orders by Thursday 11am ET – December 20, 2012 – Arrive on 12/24/2012.

UPS overnight (USA orders): Place orders by Friday 11am ET – December 21, 2012 – Arrive on 12/24/2012.

UPS International: Place orders by Monday 11am ET – December 17, 2012. Can take up extra time due to worldwide delays and customs. Should arrive by 12/24/2012 or sooner.

Please note: We do not offer Saturday service for UPS.
Tuesday, Dec. 25, 2012, Christmas, no UPS pickup or delivery service.
Tuesday, Jan. 1, 2013, New Year’s Day, no UPS pickup or delivery service.

United States Postal Service, First Class and Priority (USA orders): Place orders by Friday – December 14, 2012 – Arrive by 12/24/2012 or sooner.

USPS First class mail international (International orders): Place orders by Friday – November 23, 2012. Can take up to 30 days ore more with worldwide delays and customs. Should arrive by 12/24/2012 or sooner, but not a trackable service cannot be guaranteed to arrive by 12/24/12.

USPS Express mail international(International orders): Place orders by Friday – December 14, 2012. Can take up to 15 days or more with worldwide delays and customs. Should arrive by 12/24/2012 or sooner.

Gift Certificates are always available at any time.

When in doubt contact us!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 9/17/24 USB C Plug Breakout @adafruit @johnedgarpark #adafruit #newproductpick

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython Comes to the ESP32-P4, Emulating Arm on RISC-V, and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — IoT Vulnerability Disclosure, Decorative Dorm Lights, and more!

Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process

Electronics – Adafruit Daily — Wipe your iron!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.