Here’s a great LPD8806 project that we learned about from the Adafruit Forums!
Thanks for all the help here with getting my UNO and LPD8806 up and running.
I wired up my nutcracker with a strip and here’s a video to show how it looks.
Here’s Where You Can Learn More!
Digital RGB LED Strip
Glowy, flexy and addressable!
We love some good LED blinking as much as the next person but after years of LED-soldering we need something cooler to get us excited. Sure there are RGB LEDs and those are fun too but what comes after that? Well, we have the answer: Digital LED Strips! These are flexible circuit boards with full color LEDs soldered on. They take a lot of LED-wiring-drudgery out of decorating a room, car, bicycle, costume, etc. The ones we carry come with a removable waterproof casing.
There are two basic kinds of LED strips, the “analog” kind and “digital” kind. Analog-type strips have all the LEDs connected in parallel and so it acts like one huge tri-color LED; you can set the entire strip to any color you want, but you can’t control the individual LED’s colors. They are very very easy to use and fairly inexpensive.
The Digital-type strips work in a different way. They have a chip for each LED, to use the strip you have to send digitally coded data to the chips. However, this means you can control each LED individually! Because of the extra complexity of the chip, they are more expensive. (read more)
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — The Essential Guide to Electronics in Shenzhen
Wearables — Lithium Batteries: a soft touch goes a long way
Electronics — Capacitor Polarity Markers
Biohacking — Can Gizmos Cure Insomnia? – The New Yorker
No comments yet.
Sorry, the comment form is closed at this time.