Time travel Tuesday #timetravel a look back at the Adafruit, maker, science, technology and engineering world!

 

Road? Where we’re going, we don’t need roads. – Dr. Emmett Brown.

For the second edition of Time Travel Tuesday, we’ll be looking at the pre-Christmas period last year here at Adafruit and across the DIY open source world:

2011

At this time last year, we were just releasing new Adafruit skill badges, including Android, Instructables, Beagle Bone, Tesla Coil and the high altitude balloon.


2010

On Makezine, HP announced it was ditching its proprietary OS Touchpad and making its OS open source…we’re still waiting for the open source version to be released…HP says this will happen in 2013…


In celebration of the 2010 movie Tron, we create a do-it-yourself Tron bag tutorial, modeled by Limor here.


2009

The definitive guide to DIY projects three years ago included tons of arduino shieldsblinky projects and the introduction of the Twitchie.  Just refer back to the last three years of blog posts to see how far we’ve come in three years using these still popular products.


Hackaday featured Eyewriter, an open source eye tracking technology collective to help paralyzed graffiti artist Tony Quan make use of his eyes for movement after being diagnosed with Lou Gehrig’s disease.


Students at MIT built their first fully vertical roller coaster.  Dubbed the cowgirl, this hair-raising ride hung you upside down and terminates vertically…all compliments of our favorite college undergraduates.


2008

Meggy Jr. landed.  We started stocking the arduino-core handheld gamer. Unfortunately, they didn’t sell well and we don’t carry them now.  Some experiments take off, some don’t, but we always learn.


DIY RFID tags and readers debut on Instructables.  Of course RFID hacking has been around for a while (Wired featured five hackers back in 2006), but this is the first time we saw a how-to guide for making both the reader and tag.


Nobel prize winner Steven Chu was chosen to be the U.S. Secretary of Energy.  His appointment still stands.  We’re glad the U.S. government listens to scientists on scientific matters at least some of the time!


2007

At this time five years ago, we were rolling out the first iteration of a DIY/ LED menorah…little did we know what was to come!

Hackaday offered their two cents about how to turn headphones from in-ear to on-ear.  Their hackey advice still holds for current headphone models.


2006

Andrew, an ITP student, created Moonwalking shoes that play Michael Jackson.


2004

On Hack-a-Day Phil offered us some insight on how to run GPS on a Macbook.  Remember those old keyboards and trackpads?  And when MacBook Pros came with a disc drive? Sigh…


The recent past:

December 20th marks the anniversary of the death of Carl Sagan in 1996.  Maybe he’s teleporting in the cosmos now…

HTML4 was published fifteen years ago today.  It was the first standardized version of HTML, which went through four versions between 1990 and 1997 and still is widely used today.  HTML5 is currently in working draft form and is slated to be released in stable form by the end of 2014.


The distant past:

…this small, sallow child, previously and subsequently named JJ Thomson, went on to discover electrons, isotopes and the mass spectrometer.  If only we could invite him to help us hack!

…and with no small degree of hometown pride (is this phrase applicable to New York?), Edwin Howard Armstrong invented the feedback circuit (pictured above) and FM radio in the basement of Columbia University’s Philosophy Hall.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.