Adafruit’s Digital Addressable LED Strips are quite versatile – they’re flexible, capable of displaying 2 million colors per pixel, and their LEDs can be controlled individually – allowing for countless project possibilities.
The LED tube could be used as one “bar” of a digitally controlled bar graph installation, as part of a sculptural feature, or – my favorite – a makeshift light saber. Follow the steps below to make your own!
These LED strips are fun and glowy. There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 7-bit PWM precision (so 21-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 2 digital output pins are required to send data down. The PWM is built into each chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — “Analog Devices to Buy Linear Technology for $14.8 Billion”
Wearables — Practice patience
Electronics — Look to ferrites (no, not ferrets, the European polecat) when faced with high frequency
Biohacking — TCAPS and Mary Roach on The 99% Invisible Podcast
No comments yet.
Sorry, the comment form is closed at this time.