Assistive Technology at Both Ends of the Price Spectrum #makerbusinessmonday #makerbusiness

Here’s a thoughtful post about businesses practices at both end of the assistive technology spectrum from Adafruit community member Chris Young, who has shared his work before on Adafruit’s Show and Tell:

There seems to be a great disparity in the cost of these devices. On one hand we have the open source DIY maker community designing gadgets and giving away schematics and software for free. On the other hand we have people commercializing these projects and building businesses around them.

I’m all for people getting paid for their inventions even if the invention is designed with  altruistic motives such as helping the disabled, teaching underprivileged children,  or leveraging technology in undeveloped countries. I appreciate that some of these devices are in such small demand that the overhead to produce and sell them is great because they are built by hand and sold in small quantities. On the other hand some amazing work is being done in the DIY maker community that shares its designs and software for free and allows people to adapt it and further innovate it to meet their needs. It tends to make one wonder if the standard business model is really the best way to get products in the hands of people who need them.

Here are couple of examples… In previous installments of this blog I showed you how I showed off my IR remote control for my TV that was built with an Arduino microcontroller. My venue was Adafruit Industries weekly Show-and-Tell video chat via Google+ hangouts. This week’s hangout included a demonstration from a guy named Dino Tinitigan who had showed off some of his robotic projects in the past. But this time he showed a power wheelchair that can be controlled by tilting your head while wearing a helmet. Although he’s invested a lot of his own design work into it, it pretty much is built from off-the-shelf products the kind of which one could buy at Adafruit or other maker supply houses. He’s demonstrating that anyone with a little bit of maker ability and some time to spare can create incredibly useful technology. I don’t know if he is really creating this stuff as open-source hardware and software or if he intends to commercialize it but in either event he’s creating something and sharing it as a demonstration of what is capable and does not seem to be working out of a corporate model. Click here to see the Show-and-Tell video that demonstrates this.

At the opposite end of the spectrum is another device I stumbled onto today. It is called a Tecla device. Click here for details. It allows you to use pushbuttons or joystick or other adaptive devices to control touchscreen devices such as android and iOS phones and tablets. This is an amazing accomplishment even though it doesn’t allow 100% full access it does allow some use of such gadgets. It is Arduino-based so I understand the underlying technology. However it is only available as a commercial product and the cost is $289 Canadian. My initial reaction was Holy $#!+ That’s outrageous! On further review it probably is a reasonable price for a commercially built product with all of the capability it includes. It has a variety of interfaces that are designed to work with pushbuttons and input controls that meet an industry standard for adaptive devices. It includes the capability to use one’s wheelchair joystick as an input device. Given that it has to be designed to work with a wide variety of devices and it is a commercial enterprise I can understand the price. At the point when I can no longer use my iPod touch, I will probably be buying one of these at whatever price they want to charge for it. I’m sure the people behind it are decent people. They describe themselves as not just for profit. And I certainly have no trouble with doing well while doing good as it were. On the other hand… If I knew what I was doing I could build something similar for about $75 worth of parts.

There has to be a happy medium in here somewhere. Perhaps an open source design that demonstrates the basic functionality and would allow others to adapted as needed combined with a fully developed commercial product with all the bells and whistles for those who don’t have a friend who is a DIY maker aficionado to put it together for them.

Read more.

Each week on the Adafruit blog we post up about amazing companies, people and articles about being a MAKER and a business. Over the years we’ve shared how we run Adafruit, published code from our shopping cart system and given presentations on running an open-source hardware company. Every Monday we’re going to try to collect some of these resources and tag them #makerbusinessmonday & #makerbusiness they’re in our popular Maker Business category as well, enjoy!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here:

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in!

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community!

CircuitPython – The easiest way to program microcontrollers –

Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at !

1 Comment

  1. As DIY advocates, we too struggled with this paradox: Do we give stuff away for (almost) free as a DIY kit, risking a modest (though still valuable) impact that may die off due to lack of support or an insufficient critical mass of contributors? Or do we set up a full-fledged commercial venture with the risk of alienating the maker community in favour of a more sustainable and widespread impact?

    We did not have an answer, so we did both. The Tecla Shield is open source hardware… you can can find what you need to make your own at Check this one for example:

    Nobody should depend on us or anybody else to access what they have the right to access, so happy hacking!

Sorry, the comment form is closed at this time.