February 1, 2013 AT 5:39 pm
NEW PRODUCT – FLORA Accelerometer/Compass Sensor – LSM303 [v1.0]
NEW PRODUCT – FLORA Accelerometer/Compass Sensor – LSM303 [v1.0]. Add motion and direction sensing to your wearable Flora project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself.
We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the Flora is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins.
They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your Flora, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side.
Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — HAX Hardware Trends 2017
Wearables — Tidy wires are happy wires
Electronics — Coin Cell Current
Biohacking — Circuit Board Borg Leg Tattoo Sleeve
No Comments
No comments yet.
Sorry, the comment form is closed at this time.