0

February 8, 2013 AT 1:00 am

Scenes from #manufacturing at Adafruit: New reflow oven!

New reflow oven setup! The picked and placed boards enter the oven on a conveyor belt.

Inside the oven, the boards move through three different temperature chambers in order to bake to perfection.

A finished board leaves the reflow oven.

This is a BIG upgrade from our homemade Reflowduino.

Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!

Maker Business — Lessons Learned Scaling Airbnb 100X

Wearables — Start with a sketch

Electronics — When do I use X10?

Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !

3 Comments

  1. macegr
    February 8, 2013 at 1:53 am

    Try it with pizza! PIZZA!

  2. Chuckz
    February 8, 2013 at 8:16 am

    Good job.

    The fire extinguisher needs to be mounted on the wall or you might have an issue with the fire department (Licences and Inspection).

  3. adafruit
    February 8, 2013 at 9:33 am

    chuckz, we have them all mounted on the wall, inspected, etc, etc, etc.
    //cdn-blog.adafruit.com/uploads/2013/02/fire.jpg

Sorry, the comment form is closed at this time.

Filed under: manufacturing, tools — by Andy

Comments (3)