Check out this great project from Adam Cohen at the Milwaukee Makerspace. He sent the message:”I have a custom board using an ATTINY85 that is going into small/medium production. I wanted to build a programmer/tester that mates with my target board. This is the result.”
From the project description:
I gotta say I’m pretty proud of my design for a custom programmer shield. The images below show the Arduino, programmer shield, and a target board (ATTINY85). I made the boards using the laser cutter method (which you can find videos of on this site somehow). The target boards slip right into the header pins I bent up for the purpose. Makes a really handy programming and testing jig!
Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.