NEW PRODUCTS – ITO (Indium Tin Oxide) Coated Glass (50mm x 50mm) & PET Plastic (100mm x 200mm)
NEW PRODUCT – ITO (Indium Tin Oxide) Coated PET Plastic – 100mm x 200mm – ITO is a clear, conductive liquid/film and here we have it as a coating on a flexible plastic (PET) sheet and a 1mm glass sheet. This is a very interesting and fun material, also used in scientific research and LCD/OLED manufacture!
NEW PRODUCT – ITO (Indium Tin Oxide) Coated Glass – 50mm x 50mm – One side of the plastic is coated in ITO, you can use the flat of a blade or similar to scrape away some of the film to create ‘traces’. It may also be possible to use a laser cutter to pattern it. We’re looking forward to seeing what people do with this cool stuff!
It’s not possible to solder to this material, but you can use conductive inks, paints, copper tape (with conductive adhesive) and alligator clips to make contact.
ITO (Indium Tin Oxide) Coated PET Plastic Technical Details:
100mm by 200mm, 0.175mm thick
ITO layer on one side
50 Ω per sq inch
Weight: 6.68g
ITO (Indium Tin Oxide) Coated Glass Technical Details:
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Select Python on Microcontrollers Newsletter: PyCon AU 2024 Talks, New Raspberry Pi Gear Available and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
very exciting! i notice you physically scratch away the surface to remove the conductive layer, so it looks pretty durable. how does it hold up when exposed to (hot) water, detergents, sunlight, abrasion, etc?
very exciting! i notice you physically scratch away the surface to remove the conductive layer, so it looks pretty durable. how does it hold up when exposed to (hot) water, detergents, sunlight, abrasion, etc?