0

ArrDrownHo! – Easily convert AVR to Arduino

ArrDrownHo

ArrDrownHo! – Easily convert AVR to Arduino

Cap’n ArrDrownHo! is the lovechild of Ardweeny and Boarduino and he’s here to commandeer your AVR ships. ArrDrownHo! inherits pros of both and cons of neither. Pick up an AVR chip and start prototyping instantly on a breadboard! Want to replace that costly Arduino in your project with a cheap AVR, but don’t know how? Use the simple plug-and-play ArrDrownHo! piggybacked onto the AVR to act as interface for programming and provide power.

 


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Despite multiple bankruptcies, RadioShack continues to find ways to keep the lights on

Wearables — Tape, meet 3D printing

Electronics — A few words on inductor resistance

Biohacking — Running Blades

Python for Microcontrollers — CircuitPython is officially awesome!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. You know, the more I think about this, the better it looks! I don’t have any use for full-blown Arduino boards because I’m not likely to use any pre-built shields, so the form factor just wastes money. But packing all of the individual “housekeeping” components onto a breadboard is a bit tedious, so this may be the ideal baby-bear solution (not to hard, not too soft).

    In fact, it’s easier than a full Arduino because you don’t have to run a bunch of jumper wires to your breadboard.

    Bravo!

Sorry, the comment form is closed at this time.