LVL1′s first Quadcopter Ultimate Arial Combat Competition (QUACC)

Pasted Image 12 13 13 1 50 PM 2

I wonder how many folks will experiment with techniques to take over the competition? And make sure to take a look at the two contest rules. 😉

LVL1′s first Quadcopter Ultimate Arial Combat Competition (QUACC):

This is it, the moment you’ve all been waiting for: LVL1′s first Quadcopter Ultimate Arial Combat Competition (QUACC). This is STRICTLY limited to 16 competitors, so sign up now.

Don’t want to compete? All comers are welcome!

On December 21st, at 6pm, LVL1 is hosting its first ever Quadcopter Destruction Competition!  Test your aerial skills in the ring of battle in this single-elimination tournament of destruction! For $40, you get a quadcopter, and entry into this one-of-a-kind competition.

Here’s how it works: On December 14th, you’ll receive your Quadcopter (A Syma X1 Model).  You have 7 days to train up and modify your drone however you see fit. On the day of the competition, all competitors will be placed in a single elimination tournament. Before each round, a 3 foot crepe-paper streamer will be attached to your drone.  The match begins by a signal from the event organizer, and ends when one competitor’s quadcopter can no longer take flight, OR one competitor’s quadcopter runs out of battery power. If one quadcopter is rendered unable to take to the skies, the remaining quadcopter is the winner.  if both survive, the winner is the quadcopter with the longest streamer remaining.

Contest Rules:

  • The event organizers may disqualify any quadcopter at any time for any reason.
  • Any modifications applied to the quadcopter must pass the following test: “You must be willing to remain in the same room as the quadcopter if the controls are given to a psychopathic 12 year old.

Read more.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.