GEMMA Starter Pack – Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There’s a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-ply conductive thread, alligator clips to help you test out your circuit, and a USB cable for programming GEMMA.
- GEMMA miniature wearable electronic platform
- Four Flora RGB NeoPixels V2
- Coin cell battery holder with JST connector and on/off switch
- Stainless Thin Conductive Thread – 2 ply – 25 meter/85 ft
- Needle set with 20 pieces
- Small Alligator Clip Test Lead (set of 12)
- USB cable – A/MiniB – 3ft
- 2 x CR2032 coin cell batteries
We guarantee lots of safe sewing fun!
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — Lessons Learned Scaling Airbnb 100X
Wearables — Start with a sketch
Electronics — When do I use X10?
Biohacking — Project Peri – Translates Sound into Light for the Hearing Impaired
No comments yet.
Sorry, the comment form is closed at this time.