Here’s a video that RichardUK made of the 3D printed hexapod he created on the 3D printer he built over Christmas, shared on the Adafruit Forums:
I built my self a 3D printer over Christmas using the k8200 kit. And of course, first thing to print, some robot stuff.
I used the following hexapod 3d files with a little modification.
- 5v Trinket
- 2 micro switches
- And three micro servos.
So that I don’t have to disconnect anything to upload new code I test for LOW on pin #3 (it has a pull up on it) and test for HIGH on pin #4 ( I added a pull down)
Pins 0,1,2 are for the servos.
Hope you like it. And thanks to Kitty and Mike for help with the issues I had.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Maker Business — “Inside One of the World’s Most Secretive iPhone Factories”
Wearables — It’s not cheating
Electronics — Blown transistor?
Biohacking — “1 Minute of All-Out Exercise May Have Benefits of 45 Minutes of Moderate Exertion”
No comments yet.
Sorry, the comment form is closed at this time.